This convenient feature allows the angler to place the lure in the strike zone
over and over again. The line counter tracks how much line has been cast off
of the spool, and can be reset to zero by pushing a button.

By constructing a spool out of lightweight magnesium, the start up inertia of the spool is extremely low.
This means more energy from the cast is used in projecting the lure. These spools also feature a large
arbor so that the mass of the spool is closer to the spool's rim, allowing the spool to spin longer.
Magnesium is highly corrosive in saltwater, so use of a reel using magnesium in saltwater or brackish
water will void the reel's warranty.

The maintenance port is an easily accessed hole strategically located for easy maintenance of the reel.
Using a slot-head screwdriver, the rubber-sealed plug can be removed from the reel. Here one drop of
lightweight oil or grease can be inserted into the drive train to prevent corrosion and protect the smooth
retrieve of the reel. Be sure not to over-lubricate the reel as excessive lubrication can cause the reel to
become sluggish. Also, the use of after market spray lubricants contain cleaners and degreasers that
can actually remove the grease and oil that protect the reel and cause premature corrosion or damage
to the reel.

Before using an aftermarket lubricant, we recommend that you contact our Customer Service Department
at 1-877-577-0600 to be sure it will not damage your reel.

Reels equipped with Manual Bail Trip do not have an auto trip mechanism and the bails must be
closed manually. This feature brings added line control during freespool that is imperative to big
game-seeking saltwater anglers.

The metal construction showcased in some of our finest reels now appears throughout our line of Metal
Series products. Metal frames not only keep moving parts in precise alignment, they also feature the use
of the latest anodizing, plating and painting techniques for beautiful and durable finishes.

On wide spool reels with a non-disengaging levelwind system, the levelwind remains engaged during
the cast allowing the levelwind to track back and forth with the line as it flows off of the spool. This
eliminates the drastic line angles caused by a disengaging levelwind system that can cause extreme
friction which lead to short casts or frustrating backlashes. By doing this we have increased the efficiency
of the cast, allowing more distance with less effort.

With the Platinum Service Plan, when submitting your Warranty Registration card points, you will
receive coupons for discounts on clean and lubes (from half off to free!) Also included are Priority
Shipping labels guaranteeing 48-hour turn around time from Shimano or participating Shimano
Authorized Warranty Centers.

Line twist arising from repeated casting and retrieving is reduced by as much as 50% on reels equipped
with the Power Roller line twist reduction system. Power Roller's special grooved design assures the
line will be wrapped on the spool to minimize unwanted loops and twists during the cast.

For easy and fast one-handed casts, the line and trigger self-center and are within easy grasp of the
angler's index finger.

By recessing the reel foot further into the frame, the reel sits lower in the reel seat. This allows for a much
more palmable feel when the reel is mounted on a rod than traditional round reel designs. Not only does
it increase the comfort level, but because of its lower profile in the reel seat it makes the reel much more
maneuverable with casting styles such as underhand and roll casts.

This feature allows the angler to disengage the anti-reverse function enabling the reel to be
cranked backwards.

SF was designed to eliminate friction on the spool shaft during the cast. In standard baitcasting reels,
when the clutch bar is pressed down, the pinion gear is freed and actually can drag on the spool shaft
creating friction that can limit the length of a cast. With SF the pinion gear is supported by a ball bearing
so that when the clutch is disengaged in preparation for a cast, the pinion gear and spool shaft are kept
in perfect alignment. The result is zero friction upon the spool shaft.

The Super Slow Oscillation system evenly layers the line onto the spool, reducing the gaps between the
line wraps that can cause unwanted friction or hang-ups during casting. By laying the line in an extremely
tight parallel pattern, when layers of line are wrapped on top of a lower layer of line there are no crevices
or gaps for the upper layer to embed itself into. When the bail is open and the reel is cast, the line flows
effortlessly off of the spool for a longer cast than found with a traditional oscillation system. Reels with this
feature also come with extra spool support washers to optimize the winding shape based upon line
diameter (see owner's manual for instructions).

Super Stopper anti-reverse uses a one-way stainless steel roller bearing that eliminates back-play.
This provides the angler with instant hook setting power.

Super Stopper II anti-reverse uses a one-way roller bearing that eliminates back-play. This provides
the angler with instant hook setting power.

The titanium coated stainless steel spool lip provides incredible durability with today's braided lines.
It also drastically reduces the friction during the cast allowing for smooth, effortless casting distances.

This shifting mechanism is designed so that gearing changes are quick and easy, even while fighting
a fish. The low gear ratio used for high power retrieves is selected by pushing the button on the base
of the handle. Return to the high-speed ratio by sliding the release button along the handle shank. By
using two sets of gears, the drive and pinion gears are always engaged. There is no gear meshing
during the shift.

VBS uses centrifugal force rather than magnets to aid in controlling the cast. When turned on, the
individual brake weights are forced outward at the beginning of the cast when backlashes most often
occur, causing friction that reduces the speed of the spool. Once the spool speed begins to slow, the
pressure with which the brake weights contact the raceway lessens, allowing the spool to continue
spinning. The result is a much more consistent spool speed that is easier to manage and takes
advantage of the reel's maximum casting distance. Settings range from zero weights turned on for true
freespool or up to 6 weights turned on for extremely windy conditions and maximum cast control.

With the use of rubber gaskets the drag is sealed against intrusion of the elements such
as water and dust.